Catatan Popular

Thursday, March 3, 2011

Enthalpy of Sublimation, Hsubl

The heat (or enthalpy) of sublimation is the amount of energy that must be added to a solid at constant pressure in order to turn it directly into a gas (without passing through the liquid phase).  The heat of sublimation is generally expressed as ΔHsub in units of Joules or kiloJoules per mole or kilogram of substance.

Things to recall...

  1. A "Δ" in front of any variable indicates that the following equation is a state function in which the value of an indicator measured in the initial state of a reaction is subtracted from the value of the same indicator measured in the final state of the reaction.  The resulting value is the change in the indicator at the end of the said reaction (Δindicator). 
  2. Enthalpy is the amount of energy that is required to induce a phase change (change in the state of matter).
  3. Energy is measured in Joules or kiloJoules and is transferred through either through heat (q) or work (w).
  4. The phases involved in sublimation are the solid phase and the gas phase.

Introduction to Sublimation and Heat of Sublimation

Sublimation is the process of changing a solid into a gas without allowing the solid to pass through the liquid phase.  In order to sublime a substance, a certain amount of energy must be transferred to the substance via heat (q) or work (w).  The energy needed to sublime a substance is particular to the substance's identity and temperature and must be enough to do all of the following:
  1. Excite the substance(s) so that it reaches its maximum heat (energy) capacity (q) in the solid state.
  2. Sever all the atomic bonds in the substance(s).
  3. Excite the unbonded atoms of the substance so that it reaches its minimum heat capacity in the gaseous state.
(See attached powerpoint show in the Files section at the bottom of the page.  Select the option to play slideshow.)

The Equations

ΔHsub = ΔEtot

The energies involved in sublimation steps 1 through 3 (see Sublimation ) compose the total amount of energy that is involved in sublimation.  This can be expressed by the equation,

in which


Although a solid does not actually pass through the liquid phase during the process of sublimation, the fact that enthalpy is a state function allows us to add the various energies associated with the solid, liquid, and gas phases together.  Recall that for state functions, only the initial and final states of the substance are important.  Say for example that state A is the initial state and state B is the final state.  How a substance goes from state A to state B does not matter so much as what state A and what state B are.  Concerning the state function of enthalpy, the energies associated with enthalpies (whose associated states of matter are contiguous to one another) are additive.  Though in sublimation a solid does not pass through the liquid phase on its way to the gas phase, it takes the same amount of energy that it would to first melt (fuse) and then vaporize. 
ΔEthermal(state of matter)
A change in thermal energy is indicated by a change in temperature (in Kelvin) of a substance at any particular state of matter.  Change in thermal energy is expressed by the equation
in which



For more information on heat capacity and specific heat capacity, see heat capacity.  Specific heat capacities of common substances can easily be found online or in a reference or text book.
ΔEbond(going from state 1 to state 2)
Bond energy is the amount of energy that a group of atoms must absorb so that it can undergo a phase change (going from a state of lower energy to a state of higher energy).  It is measured
in which is the enthalpy associated with a specific substance at a specific phase change.  Common types of enthalpies include the heat of fusion (melting) and the heat of vaporization.  Recall that fusion is the phase change that occurs between the solid state and the liquid state, and vaporization is the phase change that occurs between the liquid state and the gas state.  Note that if the substance has more than one type of bond (or intramolecular force), then the substance must absorb enough energy to break all the different types of bonds before the substance can sublime.1

Graphical Representations of the Heat of Sublimation

Note that although the graph below indicates the inclusion of the liquid phase, the graph is merely a representation of how much energy is needed to sublime a solid substance.  Recall that sublimation does not include the liquid phase and that the fact that enthalpy is a state function allows us to add the enthalpies of fusion and vaporization together to find the enthalpy of sublimation.
IMG_0002.jpg         IMG.jpg

ΔHsub > ΔHvap

Though both enthalpies involve the changing a substance into its gaseous state, the change in energy associated with sublimation is generally greater than that of vaporization.  This is because of the initial state of the substances and the amount of initial energy that each substance has.  Particles in a solid have less energy than those of a liquid, meaning it is takes more energy to excite a solid to its gaseous phase that it does to excite a liquid to its gaseous phase. 
Another way to look this phenomena is to take a look at the different energies involved with the heat of sublimation:  ΔEthermal (s), ΔEbond(s-l), ΔEthermal(l), and ΔEbond(l-g).  Already we know that ΔEbond=ΔH(phase change)*Δm(changed substance) and ΔEbond(l-g)=ΔH(l-g)*Δm(gas created).  ΔH(l-g) is essentially ΔH(vaporization), meaning that ΔHvap is actually a component of ΔHsub.
 IMG_0001.jpg

Where does the added energy go?

Energy can be observed in many different ways.  As shown above, ΔEtot can be expressed as ΔEthermal + ΔEbond.  Another way in which  ΔEtot can be expressed is change in potential energy, ΔPE, plus change in kinetic energy, ΔKE.  Potential energy is the energy associated with random movement, whereas kinetic energy is the energy associated with velocity (movement with direction).  ΔEtot = ΔEthermal + ΔEbond and ΔEtot = ΔPE + ΔKE are related by the equations
ΔPE = (0.5)ΔEthermal + ΔEbond ΔKE = (0.5)ΔEthermal
for substances in the solid and liquid states.  Note that ΔEthermal is divided equally between ΔPE and ΔKE for substances in the solid and liquid states.  This is because the intermolecular and intramolecular forces that exist between the atoms of the substance (i.e. atomic bond, van der Waals forces, etc) have not yet been dissociated and prevent the atomic particles from moving freely about the atmosphere (with velocity).  Potential energy is just a way to have energy, and it generally describes the random movement that occurs when atoms are forced to be close to one another.  Likewise, kinetic energy is just another way to have energy, which describes an atom's vigorous struggle to move and to break away from the group of atoms.  The thermal energy that is added to the substance is thus divided equally between the potential and the kinetic energies  because all aspects of the atoms' movement must be excited equally

However, once the intermolecular and intramolecular forces which restrict the atoms' movement are dissociated (when enough energy has been added), potential energy no longer exists (for monatomic gases) because the atoms of the substance are no longer forced to vibrate and be in contact with other atoms.  When a group of atoms is in the gaseous state, it's atoms can devote all their energies into moving away from one another (kinetic energy).

Enthalpy of Solution, Hsoln

The enthalpy of solution, enthalpy of dissolution, or heat of solution is the enthalpy change associated with the dissolution of a substance in a solvent at constant pressure resulting in infinite dilution.
The enthalpy of solution is one of the three dimensions of solubility analysis. It is most often expressed in kJ/mol at constant temperature. Just as the energy of forming a chemical bond is the difference between electron affinity and ionization energy, the heat of solution of a substance is defined as the sum of the energy absorbed, or endothermic energy, expressed in positive values and unit kJ/mol, and energy released, or exothermic energy (negative value).
Because heating decreases the solubility of a gas, dissolution of gases is exothermic. Consequently, as a gas continues to dissolve in a liquid solvent, temperature will decrease, while the solution continues to release energy. This is an effect of the increase in heat or of the energy required to attract solute and solvent molecules—in other words, this energy outweighs the energy required to separate solvent molecules. When the gas is completely dissolved (this is purely theoretical as no substance can infinitely dissolve), the heat of solution will be at its maximum.
Dissolution can be viewed as occurring in three steps:
  1. Breaking solute-solute attractions (endothermic), see for instance lattice energy in salts.
  2. Breaking solvent-solvent attractions (endothermic), for instance that of hydrogen bonding
  3. Forming solvent-solute attractions (exothermic), in solvation.
The value of the overall enthalpy change is the sum of the individual enthalpy changes of each of these steps. For example, dissolving ammonium nitrate in water decreases the temperature of the solution. Solvation does not compensate energy spent in breaking down the crystal lattice, while adding potassium hydroxide will increase it.
Solutions with negative enthalpy changes of solution form stronger bonds and have lower vapor pressure.
The enthalpy of solution of an ideal solution is zero since the attractive and repulsive properties of ideal fluids are equal, irrespective of the compounds, thus mixing them does not change the interactions.

Enthalpy change of solution for some selected compounds
hydrochloric acid-74.84
ammonium nitrate+25.69
ammonia-30.50
potassium hydroxide-57.61
caesium hydroxide-71.55
sodium chloride+3.88
potassium chlorate+41.38
acetic acid-1.51
sodium hydroxide-44.51
Change in enthalpy ΔHo in kJ/mol in water at 25°C[1]

Enthalpy of Hydration, Hhyd

•The heat change when 1 mole of gaseous ions is hydrated in water.
•e.g:
  Na+(g) ¾® Na+(aq)    DHhyd = -406 kJ mol-1
  Cl-(g) ¾® Cl-(aq)        DHhyd = -363 kJ mol-1

Hydration

The formation of a solution involves the interaction of solute with solvent molecules. Many different liquids can be used as solvents for liquid solutions, and water is the most commonly used solvent. When water is used as the solvent, the dissolving process is called hydration.
The interaction between water molecules and sodium ion is illustrated as one of the diagram below. This is a typical ion-dipole interaction. At the molecular level, the ions interact with water molecules from all directions in a 3-dimensional space. This diagram depicts the concept of interaction only.

The above diagram also display hydrogen-bonding, dipole-dipole, ion-induced dipole, and dipole-induced dipole interactions. In the absence of these interactions, solvation takes place due to dispersion. Definitions of these terms are obvious from the diagrams. The meaning of the words used in the term also hints the nature of the interactions.

What is the energy of hydration?

Enthalpy of hydration, Hhyd, of an ion is the amount of energy released when a mole of the ion dissolves in a large amount of water forming an infinite dilute solution in the process, Mz+(g) + mH2O ® Mz+(aq) where Mz+(aq) represents ions surrounded by water molecules and dispersed in the solution. The approximate hydration energies of some typical ions are listed here. The table illustrates the point that as the atomic numbers increases, so do the ionic size, leading to a decrease in absolute values of enthalpy of hydration.
Enthalpy of Hydration (Hhyd kJ/mol) of Some Typical Ions
Ion Hhyd       IonHhyd       Ion Hhyd
H+ -1130 Al3+ -4665 Fe3+ -4430
--
Li+ -520 Be2+ -2494 F- -505
Na+ -406 Mg2+ -1921Cl- -363
K+ -322 Ca2+ -1577Br- -336
Rb+ -297 Sr2+ -1443I- -295
Cs+ -276 Ba2+ -1305ClO4- -238
--
Cr2+ -1904 Mn2+ -1841Fe2+ -1946
Co2+ -1996 Ni2+ -2105Cu2+ -2100
Zn2+ -2046 Cd2+ -1807Hg2+ -1824

From the above table, an estimate can be made for the hydration energy of sodium chloride. This amount is very close to the energy of crystallization, Ecryst. The hydration energy of an ionic compound consists of two inseparable parts. The first part is the energy released when the solvent forms a coordination compound with the ions. This energy released is called the energy of ligation, Hlig. The processes related to these energies are shown below:
Mz+ + nL = MLnz+,             Hlig
MLnz+ + solvent = MLnz+ (solution),     Hdisp
The second part is to disperse the ions or hydrated ions into the solvent medium, which has a dielectric constant different from vacume. This amount of energy is called energy of dispersion, Hdisp. Therefore, Hhyd = Hdisp + Hlig. This idea is brought up just to point out that the formation of aqua complex ions is part of the hydration process, even though the two energies are not separable. When stronger coordination is made between the ions and other ligands, they replace the coordinated water molecules if they are present. In the presence of NH3 molecules, they replace the water of Cu(H2O)62+: Cu(H2O)62+ + 6NH3 ® Cu(NH3)62+ + 6H2O

How is hydration energy related to enthalpy of crystallization?

In the discussion of lattice energy, we consider the ions separated into a gas form whereas in the disolution process, the ions are also separated, but this time into ions dispersed in a medium with solvent molecules between ions. The medium or solvent has a dielectric constant. The molar enthalpy of solvation, Hsolv, is the energy released when one mole solid is dissolved in a solvent. This quantity, the enthalpy of crystallization, and energy of hydration forms a cycle. Taking the salt NaCl as an example, the following relationship is obvious, Hhyd = Hcrystallization + Hsolv from the following diagram.

         -------Na+(g)+Cl-(g)--------
         |                       |
         |                       |
         |                       |Hcryst
         |Hhyd                    |
         |                       ¯
         |                 ----NaCl(s)---
         |                       |
         |                       |Hsolv
         ¯                       ¯
         -------Na+(aq)+Cl-(aq)--------
The term enthalpy of crystallization is used in this diagram instead of lattice energy so that all the arrows point downward. Note that enthalpy of crystallization Hcryst, and energy of crystallization, Ecryst referr to the same quantity, and they are used interchangably. The energies of solvation for some salts can be positive values, in these cases the temperatures of the solution decrease as the substances dissolve. The solvation is an endothermic reaction. The energy levels of solids and solutions reverse in order of hight. The cycle is shown below.

         -------Na+(g)+Cl-(g)-------
         |                       |
         |                       |
         |                       |Hcryst
         |Hhyd                    |
         |                       |
         ¯                       |
         ---Na+(aq)+Cl-(aq )----    |
                            ­    |
                      Hsolv  |    |
                            |    ¯
                   ---------NaCl(s)--------
In these cases, the enthalpies of hydration are less negative than the enthalpies of crystallization.

What is enthalpy of solvation?

The molar enthalpy of solvation, Hsolv, is the energy released when one mole solid is dissolved in a solvent. Note that Hsolv is also called molar heat of solution or molar energy of solution in some literature. Sometimes the enthalpy of hydration is also (mis)understood as Hsolv. When apply these values, make sure you understand the process involved. The following enthalpies of solvation are given in Chemistry by Radel and Navidi, West Publishing Co.

Enthalpy of Solvation (Hsolv kJ/mol) of Some Common Electrolytes
Substanc Hsolv             Substance Hsolv
AlCl3(s) -373.63 H2SO4(l) -95.28
LiNO3(s) -2.51 LiCl(s) -37.03
NaNO3(s) 20.50 NaCl(s) 3.88
KNO3(s) 34.89 KCl(s) -17.22
NaOH(s) -44.51 NH4Cl(s) 14.77

These values indicates that when aluminum chloride and sulfuric acid are dissolved in water, much heat is released. Due to the very small value of enthalpies of solvation, the temperature changes are hardly noticed when LiNO3 and NaCl are dissolving.

Enthalpy of Neutralization, ∆Hn

The enthalpy of neutralization (ΔHno) is the change in enthalpy that occurs when an acid and base undergo a neutralization reaction to form water and a salt. It is a special case of the enthalpy of reaction.
When a reaction is carried out under standard conditions at the temperature of 298 K and 1 atm of pressure, it is called the standard enthalpy of neutralization.
The heat (Q) released during a reaction is
Q = m c ΔT
where m is the mass of the solution, c is the specific heat capacity of the solution, and ∆T is the temperature change observed during the reaction. From this, the standard enthalpy change (∆H) is obtained by division with the amount of substance (in moles) involved, usually the amount of H+ ions:
∆H = - Q/n
The standard enthalpy change of neutralization for a strong acid and base is -57.3 kJ/mol.
The standard enthalpy of neutralization for mineral acids is far greater than that of organic acids, because strong acids ionize completely while organic acids are usually weak and ionize only partially.

Enthalpy of Atomisation, Ha

•The heat change when 1 mole of gaseous atoms is formed from its element
     •DHa is always positive because it involves only breaking of bonds
•e.g:
  Na(s) ¾® Na(g)  DHa = +109 kJ mol-1
  ½Cl2(g) ¾® Cl(g)  DHa = +123 kJ mol-1



The enthalpy of atomization (also atomisation in British spelling) is the enthalpy change that accompanies the total separation of all atoms in a chemical substance (either a chemical element or a chemical compound). This is often represented by the symbol ΔatHo or ΔHao. The associated standard enthalpy is known as the Standard enthalpy of atomization, ΔatHo/(kJ mol−1), at 298.15 K (or 25 degrees celsius) and 101.3 kPa.
The enthalpy change of atomization of gaseous H2O is, for example, the sum of the HO–H and H–O bond dissociation enthalpies. The enthalpy of atomization of an elemental solid is exactly the same as the enthalpy of sublimation for any elemental solid that becomes a monatomic gas upon evaporation.
There is a difference between a solid converting to a gas, and a diatomic gaseous element converting to gaseous atoms. The standard enthalpy change is based purely on the production of one mole of gaseous atoms.
Standard enthalpy of atomization is the enthalpy change when 1 mol of atoms in the gas phase is formed from its element in its defined physical state under standard conditions (298.15K, 1 atm).

Enthalpy of Combustion, ∆Hc

•The heat released  when 1 mole of substance is burned completely in excess oxygen.
 
 C(s) +  O2(g)   → CO2(g)                 ∆Hc = -393 kJ mol-1

The heat of combustion (ΔHc0) is the energy released as heat when a compound undergoes complete combustion with oxygen under standard conditions. The chemical reaction is typically a hydrocarbon reacting with oxygen to form carbon dioxide, water and heat. It may be expressed with the quantities:
  • energy/mole of fuel (J/mol)
  • energy/mass of fuel
  • energy/volume of fuel
The heat of combustion is traditionally measured with a bomb calorimeter. It may also be calculated as the difference between the heat of formation (ΔfH0) of the products and reactants.

Contents


 Heating value

The heating value or energy value of a substance, usually a fuel or food (see food energy), is the amount of heat released during the combustion of a specified amount of it. The energy value is a characteristic for each substance. It is measured in units of energy per unit of the substance, usually mass, such as: kJ/kg, J/mol, kcal/kg, Btu/m³. Heating value is commonly determined by use of a bomb calorimeter.
The heat of combustion for fuels is expressed as the HHV, LHV, or GHV.

Higher heating value

The quantity known as higher heating value (HHV) (or gross energy or upper heating value or gross calorific value or higher calorific value HCV) is determined by bringing all the products of combustion back to the original pre-combustion temperature, and in particular condensing any vapor produced. Such measurements often use a temperature of 25 °C. This is the same as the thermodynamic heat of combustion since the enthalpy change for the reaction assumes a common temperature of the compounds before and after combustion, in which case the water produced by combustion is liquid.
The higher heating value takes into account the latent heat of vaporization of water in the combustion products, and is useful in calculating heating values for fuels where condensation of the reaction products is practical (e.g., in a gas-fired boiler used for space heat). In other words, HHV assumes all the water component is in liquid state at the end of combustion (in product of combustion).

Lower heating value

The quantity known as lower heating value (LHV) (net calorific value or lower calorific value - LCV) is determined by subtracting the heat of vaporization of the water vapor from the higher heating value. This treats any H2O formed as a vapor. The energy required to vaporize the water therefore is not realized as heat.
LHV calculations assume that the water component of a combustion process is in vapor state at the end of combustion, as opposed to the higher heating value (HHV) (a.k.a. gross calorific value or gross CV) which that assumes all of the water in a combustion process is in a liquid state after a combustion process.
The LHV assumes that the latent heat of vaporization of water in the fuel and the reaction products is not recovered. It is useful in comparing fuels where condensation of the combustion products is impractical, or heat at a temperature below 150 °C cannot be put to use.
The above is but one definition of lower heating value adopted by the American Petroleum Institute (API) and they used a reference temperature of 60 °F (15.56 °C).
Another definition—used by Gas Processors Suppliers Association (GPSA) and originally used by API (data collected for API research project 44)—is that the lower heating value is the enthalpy of all combustion products, minus the enthalpy of the fuel at the reference temperature (API research project 44 used 25 °C. GPSA currently uses 60 °F), minus the enthalpy of the stoichiometric oxygen (O2) at the reference temperature, minus the heat of vaporization of the vapor content of the combustion products.
The distinction between the two is that this second definition assumes that the combustion products are all returned back down to the reference temperature but then the heat content from the condensing vapor is considered to be not useful. This is more easily calculated from the higher heating value than when using the previous definition and will in fact give a slightly different answer.

 Gross heating value

  • Gross heating value (see AR) accounts for water in the exhaust leaving as vapor, and includes liquid water in the fuel prior to combustion. This value is important for fuels like wood or coal, which will usually contain some amount of water prior to burning.

Measuring heating values

The higher heating value is experimentally determined in a bomb calorimeter by concealing a stoichiometric mixture of fuel and oxidizer (e.g., two moles of hydrogen and one mole of oxygen) in a steel container at 25° is initiated by an ignition device and the combustion reactions completed. When hydrogen and oxygen react during combustion, water vapor emerges. Subsequently, the vessel and its content are cooled down to the original 25 °C and the higher heating value is determined as the heat released between identical initial and final temperatures.
When the lower heating value (LHV) is determined, cooling is stopped at 150 °C and the reaction heat is only partially recovered. The limit of 150 °C is an arbitrary choice.
Note: Higher heating value (HHV) is calculated with the product of water being in liquid form while lower heating value (LHV) is calculated with the product of water being in vapor form.

 Relation between heating values

The difference between the two heating values depends on the chemical composition of the fuel. In the case of pure carbon or carbon monoxide, both heating values are almost identical, the difference being the sensible heat content of carbon dioxide between 150°C and 25°C (sensible heat exchange causes a change of temperature. In contrast, latent heat is added or subtracted for phase changes at constant temperature. Examples: heat of vaporization or heat of fusion). For hydrogen the difference is much more significant as it includes the sensible heat of water vapor between 150°C and 100°C, the latent heat of condensation at 100°C and the sensible heat of the condensed water between 100°C and 25°C. All in all, the higher heating value of hydrogen is 18.2% above its lower heating value (142 MJ/kg vs. 120 MJ/kg). For hydrocarbons the difference depends on the hydrogen content of the fuel. For gasoline and diesel the higher heating value exceeds the lower heating value by about 10% and 7%, respectively, for natural gas about 11%.
A common method of relating HHV to LHV is:
HHV = LHV + hv x (nH2O,out/nfuel,in)
where hv is the heat of vaporization of water, nH2O,out is the moles of water vaporized and nfuel,in is the number of moles of fuel combusted.[1]
Most applications which burn fuel produce water vapor which is not used and thus wasting its heat content. In such applications, the lower heating value is the applicable measure. This is particularly relevant for natural gas, whose high hydrogen content produces much water. The gross energy value is relevant for gas burnt in condensing boilers and power plants with flue gas condensation which condense the water vapor produced by combustion, recovering heat which would otherwise be wasted.

Usage of terms

For historical reasons, the efficiency of power plants and combined heat and power plants in Europe is calculated based on the LHV, while in e.g. the US, it is generally based on the HHV. This has the peculiar result that contemporary combined heat and power plants, where flue gas condensation is implemented, may report efficiencies exceeding 100 % in Europe.
Many engine manufacturers rate their engine fuel consumption by the lower heating values. American consumers should be aware that the corresponding fuel consumption figure based on the higher heating value would be somewhat higher.
The difference between HHV and LHV definitions causes endless confusion when quoters do not bother to state the convention being used.[2] since there is typically a 10% difference for a power plant on natural gas between the two methods.

 Accounting for moisture

Both HHV and LHV can be expressed in terms of AR (all moisture counted), MF and MAF (only water from combustion of hydrogen). AR, MF, and MAF are commonly used for indicating the heating values of coal:
  • AR (As Received) indicates that the fuel heating value has been measured with all moisture and ash forming minerals present.
  • MF (Moisture Free) or Dry indicates that the fuel heating value has been measured after the fuel has been dried of all inherent moisture but still retaining its ash forming minerals.
  • MAF (Moisture and Ash Free) or DAF (Dry and Ash Free) indicates that the fuel heating value has been measured in the absence of inherent moisture and ash forming minerals.

 Heat of combustion tables

Higher (HHV) and Lower (LHV) Heating values of some common fuels[3]
Fuel↓HHV MJ/kg↓HHV BTU/lb↓HHV kJ/mol↓LHV MJ/kg↓
Hydrogen141.8061,000286121.00
Methane55.5023,90088950.00
Ethane51.9022,4001,56047.80
Propane50.3521,7002,22046.35
Butane49.5020,9002,87745.75
Pentane45.35
Gasoline47.3020,40044.40
Paraffin46.0019,90041.50
Kerosene46.2043.00
Diesel44.8019,300
Coal (Anthracite)27.0014,000
Coal (Lignite)15.008,000
Wood15.006,500
Peat (damp)6.002,500
Peat (dry)15.006,500
Higher heating value of some less common fuels[3]
Fuel↓HHV MJ/kg↓BTU/lb↓kJ/mol↓
Methanol22.79,800726.0
Ethanol29.712,8001,300.0
Propanol33.614,5002,020.0
Acetylene49.921,5001,300.0
Benzene41.818,0003,270.0
Ammonia22.59,690382.0
Hydrazine19.48,370622.0
Hexamine30.012,9004,200.0
Carbon32.814,100393.5

Heat of Combustion for some common fuels (higher value)
Fuel↓kJ/g↓kcal/g↓BTU/lb↓
Hydrogen141.933.961,000
Gasoline47.011.320,000
Diesel45.010.719,300
Ethanol29.77.112,000
Propane49.911.921,000
Butane49.211.821,200
Wood15.03.66,000
Coal (Lignite)15.04.48,000
Coal (Anthracite)27.07.814,000
Natural Gas54.013.023,000

 Lower heating value for some organic compounds (at 15.4°C)

FuelMJ/kgMJ/LBTU/lbkJ/mol
Paraffins
Methane50.009——802.34
Ethane47.794——1437.17
Propane46.357——2044.21
Butane45.752——2659.30
Pentane45.357-—3272.57
Hexane44.752-—3856.66
Heptane44.566-—4465.76
Octane44.427-—5430
Nonane44.311-——
Decane44.240———
Undecane44.194———
Dodecane44.147———
Isoparaffins
Isobutane45.613———
Isopentane45.241———
2-Methylpentane44.682———
2,3-Dimethylbutane44.659———
2,3-Dimethylpentane44.496———
2,2,4-Trimethylpentane44.310-——
Naphthenes
Cyclopentane44.636———
Methylcyclopentane44.636———
Cyclohexane43.450———
Methylcyclohexane43.380———
Monoolefins
Ethylene47.195———
Propylene45.799———
1-Butene45.334———
cis-2-Butene45.194———
trans-2-Butene45.124———
Isobutene45.055———
1-Pentene45.031———
2-Methyl-1-pentene44.799———
1-Hexene44.426———
Diolefins
1,3-Butadiene44.613———
Isoprene44.078-——
Nitrous derivated
Nitromethane10.513———
Nitropropane20.693———
Acetylenes
Acetylene48.241———
Methylacetylene46.194———
1-Butyne45.590———
1-Pentyne45.217———
Aromatics
Benzene40.170———
Toluene40.589———
o-Xylene40.961———
m-Xylene40.961———
p-Xylene40.798———
Ethylbenzene40.938———
1,2,4-Trimethylbenzene40.984———
Propylbenzene41.193———
Cumene41.217———
Alcohols
Methanol———
Ethanol28.865———
n-propanol30.680———
Isopropanol30.447———
n-Butanol33.075———
Isobutanol32.959———
Tertiobutanol32.587———
n-Pentanol34.727———
Ethers
Methoxymethane28.703———
Ethoxyethane33.867———
Propoxypropane36.355———
Butoxybutane37.798———
Aldehydes and ketones
Methanal17.259———
Ethanal24.156———
Propionaldehyde28.889———
Butyraldehyde31.610———
Acetone28.548———
Other species
Carbon (graphite)32.808———
Hydrogen120.971———
Carbon monoxide10.112——283.23712
Ammonia18.646———
Sulfur (solid)9.163———

Note that there is no difference between the lower and higher heating values for the combustion of carbon, carbon monoxide and sulfur since no water is formed in combusting those substances. Higher heating values of natural gases from various sources
These data on higher heating values were obtained from the International Energy Agency:[4]
The lower heating values of the above natural gases are about 90 percent of the higher heating values.